BTUN-02
AM/FM TUNER WITH RS232
5
Auto Memory
1
Start scan from the current frequency
and write each station into preset
sequentially
2
Start scan from FM 87.5MHZ to 107.95 then
AM 530 to 1690, write each station into
preset sequentially.
6
RDS Mode
1
2
3
4
5
Outputs feedback one by one (i.e. on demand)
Outputs feedback every 0.5 seconds
Outputs feedback every 1 seconds
Outputs feedback every 2 seconds
Outputs feedback every 5 seconds
7
Preset Scan
1
2
3
4
5
Scan up preset number to play each preset for
5 sec
Scan Down preset number to play each preset for
5 sec
Stop the preset scan
Move and stop only once at the next preset
of higher number
Move and stop only once at the next preset
of lower number
8
Write/Erase a preset
1
2
Enter a "0" to erase the current preset shown
in the display
write the frequency into the entered number
01..32
9
Up/Down Tuning
1
2
3
4
Auto tune up frequency
Auto tune Down frequency
Manual tune up frequency one step
Manual tune down frequency one step
10
Stereo/Mono mode
1
2
Let Tuner received signal controll the mode
Force the tuner into Mono mode reception (Stero
mode is set each time the auto-tuning is engaged)
11
Get frequency
Get Preset number
Get Tuning mode
G e t Receving mode
1
2
3
4
Output in ASCII, the band and frequency listening
Output in ASCII, the preset number that is
displaying
Output in ASCII, the current tuning in "auto" or
"manual"
Output in ASCII, the current receiving mode in
"Stereo" or "Mono"
Get Operating
Status
5
Output in ASCII, the Frequency Preset number,
Tuning Mode, Receiving Mode, Zone ID, IR ID, and
Power status
12
Purge EEPROM
111
Purge the EEPROM and restore it to the
default setting
13
MPU Reset
111
Reset the MPU to default settings
15
Program T118
Zone ID
888
222
Program BTUN-02 Zone ID "number"
Return BTUN-02 Zone ID
