Safety Warning
BOXLIGHT.COM
1
Safety Warning
Before operating, please read this manual thoroughly and keep it for future reference.
Images shown in this manual are indicative only. There may be differences between the
pictures and the actual product, so please prevail in kind.
Placement
Do not put heavy objects on top of the unit.
Do not put the unit near appliances that generate magnetic fields.
Do not expose the unit to direct sunlight and other sources of heat.
Do not place the unit on an unstable cart, stand, tripod, bracket, table, or shelf.
Do not put any liquid near or on the unit, and make sure to not spill any liquid inside the
unit.
Power Supply
Please keep the power cable from physical or mechanical damage.
Please check and ensure AC source is connected with the ground.
The power cable comes with the device and is exclusively for this device.
Please unplug power supply when there is thunder or lightning outside.
Check that the unit’s operating voltage is identical with your local power supply.
Please use the original power cable from the accessory bag—don't modify or lengthen
this cable.
Please unplug the power supply when there is nobody home or if the unit will be idle for
a long time.
LED Screen
Unplug the power cable before cleaning.
Clean the screen with a soft, dustless, and dry cloth.
For a deep clean, please contact an authorized service center.
Never use water or spray detergent to clean the unit.
Never use any other hard or sharp object to replace the touch pen.
For optimal panel lifetime and display performance, do not display high brightness
images for lengthy periods of time.
Temperature
Normal operating temperature is 0 ~ 40°C.
Do not place the unit near or over a radiator or a heater.
If your unit is suddenly moved from a cold place to a warm place, please unplug the power
cable and do not turn it on at least two hours, making sure any moisture inside the unit
has completely evaporated.
Humidity
Do not expose the unit to rain or place in an area of high humidity.
Please make sure the indoor environment is dry and cool. Normal operating
humidity is 10%~90%RH.
