BOXLIGHT MP-45, Руководство по обслуживанию

Страница: 13 / 130

-13-
■
Optical Parts Disassemblies
Before taking this procedure, remove Cabinet Top and Main Board following to the “Mechanical Disassemblies”.
Disassembly requires a 2.0mm or 2.5mm hex wrench and a slot screwdriver.
1
Remove each hex screw and pull the Polarized Glass-In ass’y upward.
2
Remove a stopper and take the glass off upward.
Polarized Glass-In removal
Fig.2-
1
Fig.2-
2
Stopper
polarized glass
* Glass should be placed as the
printed marker comes to the
upper left corner.
Phase Sheet
Part No. is printed on
upper side.
Lens attachment
4.0mm hex wrench
Fig.1-
2
Fig.1-
1
B
B
B
B
A
1
Shift the Projection lens to the low end by the LENS SHIFT function.
2
Remove Cabinet Front-Top following to the chapter “Mechanical
Disassemblies”.
3
Slide the lens lock lever
A
on the projector to "UNLOCK"(UPPER) posi-
tion and remove the Projection Lens ass’y off.
Note : When making unlocking, attach your hand to prevent the lens fall.
4
Disconnect the connector and remove 4 screws
B
and take the
Projection lens from the lens attachment.
Projection Lens removal
Connector