BOXLIGHT MimioClarity, Техническое руководство пользователя

Страница: 19 / 43

Page | 19
Clarity Accounts
The Clarity amplifier contains two account types:
1. “user” account – This account is designed for the “End User” who would like to make minor
adjustments to the audio input, output, or digital equalizer settings as well as connect a
bluetooth device as a source audio input.
2. “IT” account – This account is designed for the staff members responsible for the setup and
maintenance operations related to the Clarity amplifier.
Accessing the Clarity Amplifier Interface
The Clarity Amplifier is accessed via your favorite web browser (Chrome recommended) using the USB-C
port or via the network. However, to access the amplifier you must know the IP address of the device. By
default, the USB IP address is pre-set. Accessing the amplifier over the network will require the use of the
speakers or a network scanner, e.g. Advanced IP Scanner.
From the factory, the Clarity Amplifier is set to announce (through the speakers and/or 3.5 audio output)
the IP address of the wired, wireless, and USB connections when the device is booted.
Note: If you’re having trouble accessing the User Interface of the amp, see Installing Amplifier USB Drivers .
Accessing via the Network
These instructions assume you are in the same room as the amplifier with speakers, and/or the
headphones are connected to the amplifier.
1. Press the reset button. ( See Clarity Connections )
2. Listen for the amplifier to announce the IP address of the wired network.
3. Type the IP address in your favorite web browser and press enter.
NOTE: This can also be done by unplugging and replugging the amplifier to it.