MyBot Base Kit Assembly Instructions v1.4a
Page 18 of 18
(For kits supplied with black wheels)
MyBot Base Kit | Assembly Guide
STEP P13.3 – Mounting the Two Additional Sensors:
P13.3
Position the sensors so that the wires face the motors
as shown and secure each sensor using two (2) of the
medium Quick Connects.
a.
Route the wires under the plate and to the top-
side of the robot through the gap between the
base plate and the Cow-Catcher. (Note: these
wires can join the wire coming from the Optical
Distance Sensor and be held in place with a small
twist-tie or cable-tie.)
During
Step 19 – Wiring the Robot
:
The color sensor gets connected to an I2C port.
The Magnetic Field Sensor gets connected to Port
A1.
Remember that with the word Fusion toward you, all of the
black wires from the sensors are to the right.
Continue with step 14 on page 9.
4x
1x
1x