BOXLIGHT Cinema 17SF, Руководство пользователя

Страница: 10 / 28

E
nglish
10
Installation
Powering Off the Projector
1. Press the “Power/Standby” button to turn off the projector lamp.
2. After pressing the “Power/Standby” button, you will see a message
“Power off the lamp?” on the on-screen display. Press the “Power/
Standby” button again to confirm. Otherwise the message will disappear
after 5 seconds.
3. “Power/Standby” LED indicator will light solid amber for about 30
seconds. After the “Power/Standby” indicator starts flashing, you can
turn off the main power switch on the side of the projector.
If you want to turn on the projector, you must press the “Power/
Standby”button within 90 seconds of the start of the indicator flashing.
4. Do not turn on the projector immediately following a power off
procedure.
v
When the “LAMP” indicator flashs green for about 10 seconds, you will see a
message “Fan Fail” on the on-screen display. Please contact your local reseller
or H55 service center.
v
When the “TEMP” indicator lights solid orange, it indicates the projector
has been overheated. You will see a message “Over Temperature” on the on-
screen display. The projector will automatically shut itself down.
Under normal conditions, the projector can be switched on again for your
presentation. If the problem persists, you should contact your local reseller or
H55 service center.
Downloaded from ProjectorsManual.com Manuals
All manuals and user guides at all-guides.com