E
nglish
17
Brightness
Adjusting the brightness of the image.
4
Press the to darken image.
4
Press the to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest
parts of the picture. Adjusting the contrast changes the amount of black and
white in the image.
4
Press the to decrease the contrast.
4
Press the to increase the contrast.
Color Temperature
Adjust the color temperature. The range is from 0 to 4. The factory
default is 2. With the higher temperature, the screen looks colder; with the
lower temperature, the screen looks warmer.
Zoom
4
Press the to Magnify an image up to a factor of 32 times on the projection
screen.
4
Press the to Diminish the zoom in image.
Keystone (Keystone Correction)
Adjust image distortion caused by tilting projection. (±16 degrees)
White Segment
Use the white segment control to set the white peaking level of DMD chip.
0 stands for minimal peaking, and 10 stands for maximum peaking.
If you prefer a stronger image, adjust toward the maximum setting.
For a smooth and more natural image, adjust toward the minimum setting.
User Controls
u
u
u
u
u
u
Image-I (Computer mode)
Audio
Image-I
Image-II
Language
Management
Brightness
Contrast
Color Temp.
Zoom
Keystone
Computer mode
White Segment
Low
High
Downloaded from ProjectorsManual.com Manuals
All manuals and user guides at all-guides.com
