BOXLIGHT BL WX25NU, Руководство пользователя

Страница: 40 / 71

38
Network Control Software Application
Network Control is provided in visual interface, it can help user to monitor and manage the
projector(s) status in the local area network.
1. Register the projector(s) which needs to be controlled.
" Auto search " can help you to seek the projector(s) source easily.
After registering in the work group, you can start to control the projector.
2. Group the projector(s) into different sections.
You can monitor the status easily by the sort of group name function in the network.
3. Monitor the status for each projector.
a.You can manage and change the monitoring content by System Parameter Setting.
b. The Lamp timer, filter working time or system warning feedback etc. can be known
by checking the status for projector(s).
4. Control the booked projector(s).
The status can be refreshed and acquired by monitoring functions; you can also operate the function
easily by Network Control.
NOTE:
To monitor and control the projector(including stand-by mode), the following conditions need to be
ready:
(1) Projector should already be powered on.
(2) Projector is connected to network.
(3) LED light of the projector network port shows normal. (Green light on, Orange twinkle)
* Stand-by mode indictor: Green LED (Power) on the projector’s control panel flashes.
Before To Use Network Control Software
1. If the system is Windows 2000, XP or Vista, the PC should be started by the Administrator.
2. Before starting the Network Control software, please check the following.
(2-1) The computer must have Network Control software installed.
(2-2) The projector should be powered on and the LAN wire is well connected to projector.
(2-3) The LAN module ON/OFF item in SECURITY menu of OSD should be setting ON.
(2-4) Make sure the computer and projector can connect to network. Network Control software
needs to arrange in TCP/IP network communication and the network cable.
NOTE:
IE8 browser & 1024x768 viewing resolution is recommended.