BOXLIGHT BL WX25NU, Руководство пользователя

Страница: 12 / 71

10
Setting Up
Turning on the power
1. Make sure that power cord is firmly and
correctly connected to the projector.
2. Remove the lens cover, and the POWER
indicator will light up in green.
3. Press POWER button on the control panel or
the remote control to turn on the projector.
4. Rotate the focus ring to adjust the focus.
Turning off the power
1. Press the POWER button on the control
panel or the remote control. The “power off”
confirmation message appears.
2. Press the POWER button again while the
message appears.
3. When the projector enters “Standby” mode,
the POWER indicator will light up in green.
4. If you don’t use the projector, remove power
cord.
WARNING

Do not touch around the lamp cover and the
exhaust vents during use or just after use, since it
is too hot.

An apparatus with CLASS I construction shall be
connected to a MAINS socket outlet with a protective
earthing connection.

The MAINS plug or an appliance coupler shall
remain readily operable.
WARNING

A strong light is emitted when the projector’s
power is on. Do not look into the lens of the
projector or look inside of the projector through
any of the projector’s openings.
CAUTION

Do not turn off the AC power for 60 seconds
after the lamp is turned on. Doing so could cause
premature lamp failure.
Power ON / OFF
AC inlet
Outlet
Focus ring
1.
2.
3.~4.
5.