Page 18/20
BOXER BOOM MOWER | User manual
September 2019
7.
STORAGE
Before disconnecting the machine:
1.
Thoroughly clean all moving parts, particularly the rotors.
2.
Check for damaged or missing flails.
3.
Check all hoses for damage or leaks.
4.
Grease and lubricate all moving parts.
5.
Parts that are damaged or missing must be replaced immediately.
When preparing the machine for storage, follow the following instructions:
1.
Position the mower head on the ground.
2.
Make sure that all hydraulic or rotating movements have stopped.
3.
Position the machine so that it is level and stable.
4.
Lower the machine and position it on a flat surface. The machine can then be disconnected from the three-
point lifting device.
5.
Switch the tractor off.
6.
Operate the control levers in both directions to decrease the hydraulic pressure to 0 bar.
7.
Remove the control levers from the tractor and position them so that the cables cannot bend.
8.
Remove the power take-off and place it at a safe distance.
9.
Remove the lock pins from the lower arm.
10. Remove the top rod.
11. Once the machine has been disconnected completely, the tractor can be moved away safely.
12. Set the machine in a dry area and on a flat surface.