Page 12/20
BOXER BOOM MOWER | User manual
September 2019
•
Saw and smooth the two ends of the power take-off and clean them of any dirt and sawing residue.
•
Lubricate the two ends and join the two parts of the power take-off once again.
•
Install the power take-off and check that the length is correct.
Protection systems can be installed:
•
Shear bolt coupling
•
Disc clutch coupling
Connect the lowest connections of the tractor to the machine and make sure that the pins are securely locked using
lock pins.
Check that the lock pins are in the right location and that the nuts have been tightened properly.
When installing on the three-point lifting device, the position of the side arms must be adjusted as shown.
Never stand between the tractor and the machine when connecting.
Fasten the top bar using cotter pins and lift the machine so that the power take-off of the tractor is at the same
height as the machine.
Fasten the safety chain so that the machine cannot swerve sideways.