06
How to adjust the flight of a pair of targets
Tools required: 24mm SPANNER and 8mm ALLEN KEY
1. Loosen 16mm nut
2. Loosen 16mm bolt
3. Loosen 16mm long nut
4. Loosen 8mm cap screw
The 2 arms are now ready to move. Adjust the
arms in small increments. A 10mm adjustment at
the end of the arm will alter the flight of the clay by
feet. Once the arm has been moved, re
-
tighten the
arm in the reverse order.
The nut and bolt need tightening securely
however, the long nut and the 8mm cap screw
hold the two arms together and must be kept
extremely tight. If the flight of the clays is not
satisfactory, repeat the process.
