background image

Thank you, 

for purchasing a high quality Bowman charge air cooler.

Bowman has been manufacturing charge air coolers for over 50 years and our products are 
renowned for their quality, heat transfer performance and durability
Please read this ‘Installation, Operation & Maintenance guide’ fully and carefully before installation 
to ensure your charge air cooler operates efficiently and reliably.
Please keep this guide for future reference to ensure the long term performance of you Bowman 
charge air cooler.
Should you require additional advice or assistance, please contact your Bowman stockist or 
distributor.
Installation, Operation & Maintenance guides are also available in:

If you require a copy of this guide in one of these languages, visit  
https://www.ej-bowman.com/downloads/ where copies are available to freely download. 

Introduction

2

 2

All rights reserved
E.J. Bowman (Birmingham) Ltd, reserve the right to change specifications without prior notice.  
All material contained in this brochure is the intellectual property of EJ Bowman (Birmingham) Ltd. 
It is protected under copyright and may  not be reproduced without prior written consent of the 
company.

French

German

Italian

Spanish

Polish

Russian

Chinese

Содержание EC120













Отзывы: