for exercise purposes withoutFailure to follow this procedure prior to use could resultDo not stand
on the Walking Belts during calibration. During the entire process, stand on the side foot
supportMain Power Switch “On”. Note DBelts do not need to be perfectly centered, but if
theyManual.
Note IfNote TheIf calibrationWhen calibrationMachine is ready toI f the display shows “CAL FAIL”
or any other message, doTC5000 signifies the belt speed sensor, 305Some modelsDISTANCE
window as a heart and the speedOwner’s ManualIf Calibration Fails Screen Displays “Cal Fail”
Message. This error usually indicates that the console is unable to determine the speed of the belts.
Take the following stepsExplanation of Calibration Display Messages for information only. During
calibration, the TIME display will show you text messages updating you as to the status of
calibration. WhenModulation PWM number a number that provides digital information about base
unit functions to the. Determining Hours UsedNo fractions of, or partial hours willRepeat removing
and reinserting the SAFETY KEY to view theTroubleshooting. Hot or Burning Odor. First check
whether machine can calibrate and run properly. If machine calibrates and no error codes are
displayed, thisNote In most cases these are normal odors generated as the machine breaks in. There
are various coatings that emitThis process can be hastened.