21
ENGLISH
10. Specifications
Audio Specifications
Load impedance range:
>3Ω per channel (>6Ω in bridge mode)
Output Power per channel, non-clipped:
60W into 8Ω
125W into 4Ω
Output Power bridge mode, non-clipped:
250W into 8Ω
Output Power total, all channels:
500W short term
>125W continuous
DC offset voltage:
<50mV
Frequency Response (-3dB):
<10Hz to >30kHz, any load impedance
Frequency response accuracy 20Hz-20kHz:
+/-1dB
Dynamic range:
>85dB A-Weighted
THD+N (1kHz, 500W, 4Ω):
less than 1%
Voltage Gain:
15dB to 39dB, adjustable
Input impedance:
10KΩ
Maximum input voltage:
4 Vrms
Signal sense threshold:
2.5mV (independent of Gain setting)
Wake-up time:
<0.2s (If other zones active)
<2s (From all zones inactive)
Turn-off time:
15 minutes from last signal detected
12V trigger input threshold:
typically 3V (recommended input is 5-15V)
Controls & Indicators
Front panel:
1 x Power LED (Unit active – White, Fault – Red)
1 x Network status LEDs (Network present – White, Fault – Red)
2 x Zone status LEDs (Signal present – White, Fault – Red)
Rear panel:
Reset button
Connectors
Input:
2 x RCA (pair) Phono socket, Analogue line in
2 x RCA Phono socket, Digital line in
1 x Ethernet
Output:
2 x 5.08mm Pitch 4-way Phoenix Combicon style
12V trigger control:
1 x 3.5 mm jack - 12V trigger IN
1 x 3.5 mm jack - 12V trigger OUT (Maximum 100mA pass-through)
Power
Power consumption:
<0.5W Standby, WoL disabled
<0.5W Standby, WoL enabled
130W maximum average
1,600W peak
AC supply:
100-240V 50/60Hz
AC inlet:
IEC C14, switched
Thermal
Thermal dissipation:
1.7 BTU/hr (standby),
130 BTU/hr (Idle),
500 BTU/hr (max)
Dimensions
Height:
Width:
Depth:
42.5 mm (1.7 in) 1U [55.5mm (2.2in) plus feet]
437 mm (17.2 in)
310 mm (12.2 in)
Net weight:
4.1kg (9.0lb)
Finish:
Black
Содержание CDA-4D
Страница 1: ...CDA 4D Distribution Amplifier...
Страница 17: ...17 ENGLISH Third party products when a User Preset is selected...