User manual
eDAS
Enhanced Data Acquisition System
Rev.
EN-02_18 AVC
Date:
(IT 21_03_16 rev. 2 AM)
- 17 -
Modem connection
PC pole
Modem units are generally supplied with a charger and a RS232 cable
as standard equipment. If your PC has no serial port you will need to
get a USB-RS232 adaptor.
In this latter case the adaptor needs to be installed firstly (refer to the
product instructions).
GSM MODEM
1.
Connect modem to your PC via cable
2.
Insert aerial plug (standard accessory)
into modem socket
3.
Insert your SIM card in its drive after
disabling its PIN code(
*
)
4.
Connect the 220V mains adapter to the modem
(*) You can do this by inserting your SIM card in a portable phone and then proceed
to PIN code disabling. Now the card is ready to go into your modem.
The status LED will turn on to confirm it is now active:
1.
Fast flashing (1/1s) = Searching for phone signal / No signal
2.
Slow flashing (1/3s)= working OK
3.
Steady light
= phone connection on
eDAS
pole
In this case, the modem unit is generally pre-mounted and pre-cabled
inside the Powerbox (or
eDAS
box) and it is already connected to power
supply.
Follow instruction as above or the ensuing operations.
Supply
socket
RS 232 port
to PC
SIM drive
Status LED
