User manual
eDAS
Enhanced Data Acquisition System
Rev.
EN-02_18 AVC
Date:
(IT 21_03_16 rev. 2 AM)
- 10 -
Connecting sensors
Connect sensors to the input channels routing them through the box
cable glands.
Screw tightly the glands so that no dust or water can enter to get IP65
tightness conditions. Remember to seal any cable glands not in use.
Before electric connection of sensors, check that the configuration of all
the input channels is correct.
Below you’ll
find the connections for the sensors most frequently used:
Potentiometric sensors
These include:
Displacement transducers of PZ, PY, PC, LWG series (no conditioner)
Inclinometers of BIAX series (no conditioner)
Temperature sensors of NTC series
Sensors with conditioners
All kind of sensors with voltage or current output
The dedicated channels will be configured according to the type of
sensors to be connected
Refer to the Tables shown in next page for directions.
