Boundless 4000/160, Руководство пользователя

Страница: 104 / 107

NOTE TO INSTALLER
This equipment complies with the FCC Regulation for Class A devices,
Subpart J of Part 15. Shielded, grounded interface cables were used on
all ports for FCC radiated emission testing.
The manufacturer is not responsible for any violation of the FCC
Regulation for Class A devices that is caused by unauthorized
modification of the equipment, or caused by equipment installation not in
accordance with the instructions in this manual.
This equipment generates, uses, and can radiate radio frequency energy
and may cause radio or television interference. All user equipment that
interfaces with other products should be connected with shielded cables.
(Contact a local dealer for more information on shielded cable assemblies
and their availability.)
There is no guarantee that interference will not occur. If radio or
television interference occurs (this can be determined by turning the
equipment off and on while the radio or television is on), the user is solely
responsible for correcting the interference and is encouraged to take one
or more of these measures:
1. Reorient the receiving antenna.
2. Relocate the equipment, or move the equipment away from the
receiver.
3. Plug the equipment into a different outlet so the unit and
receiver are on different branch circuits.
4. Consult the dealer or an experienced radio/television
technician.
It is also suggested that the user read the FCC booklet entitled How
to Identify and Resolve Radio-TV Interference Problems. The booklet
is available from the US Government Printing Office, Washington, DC
20402. (When ordering the booklet, specify stock number 04-000-
00345-4.)
Site Preparation
The screen display geometry on terminal products is aligned using
magnetic devices. External magnetic fields created by other types of
electronic equipment, such as printers, in very close proximity to the
terminal, may cause minor display distortion.