Boundless 4000/160 Скачать руководство пользователя страница 18

Страница: 18 / 107

xii Preface

Safety Notices

Danger Notices

A danger notice indicates a hazard that could possibly cause
death or serious personal injury.
The following danger notices are used throughout this manual.

DANGER:

To prevent a possible electrical shock when installing

the device, ensure that the power cord for that device is
unplugged before installing signal cables.

DANGER:

To prevent a possible electrical shock when adding the

device to a system, disconnect all power cords, if possible, from
the existing system before connecting the signal cable to that
device.

DANGER:

To prevent a possible electrical shock during an

electrical storm, do not connect or disconnect cables or station
protectors for communication lines, display stations, printers,
or telephones.

DANGER:

To prevent a possible electrical shock from touching two

surfaces with different electrical grounds, use one hand, when
possible, to connect or disconnect signal cables.

DANGER:

To avoid a shock hazard:

The power cord must be connected to a properly wired and
earthed receptacle.

Any equipment to which this product will be attached must
also be connected to properly wired receptacles.

Содержание 4000/160











































































































Результаты поиска

Содержание 4000/160

Отзывы:

Бренды по названию

Популярные бренды

Boundless 4000/160, Руководство пользователя

Результаты поиска

Содержание 4000/160

Отзывы:

Бренды по названию

Популярные бренды