7
STEP-BY-STEP
GUIDE
0800 003 006
/
boundaryline.co.nz
FLANGED POST
INSTALLATION
STEP 2 (B) –
POST SETUP AND ALIGNMENT
Ensure that you have marked out the placement of your posts thoroughly. Failure to do so will cause unnecessary
holes in the surface of your concrete or timber.
The same principal of the gap between a string line and the posts works for both in-ground and flanged posts, this
will ensure a straight line of posts. Refer to page 6 for a diagram of this.
Refer to the table on page 5 for the standard spacings required to house the slats without the need for cutting
bays down.
65 x 65mm flanged
fixing (post slides
onto fixing)
100 x 100mm welded
flanged post
Fixing a flanged
post to the top
of a Masonry
block wall is not
recommended.
This can cause the
face of a block to
‘blow-out’
!
IMPORTANT
