2
STEP-BY-STEP
GUIDE
0800 003 006
/
boundaryline.co.nz
INTRODUCTION
Thank you for choosing
Boundaryline
Elite
Wall
TM
Aluminium Slat Fencing. This
product will provide you
with many years of trouble
free protection if installed in
accordance with the directions
outlined in this document.
-
This guide does not apply
to any fences over 1.8m in
height. If your fence is greater
that 1.8m, please seek further
advice from Boundaryline.
-
Describe your site details
when ordering materials.
-
Identify your soil type/
ground conditions. Refer to
Square
Tape Measure
Shovel
Post Hole Digger
Rubber Mallet
String Line
Hex Driver Bit
Drill/Driver
Angle Grinder
Spirit Level
Line Marking Paint
Circular Saw
Safety Boots
Gloves
Helmet
Eye Protection
Hearing Protection
Sun Protection
-
Make sure you choose
the right tools before start
installing your fence.
BEFORE YOU START, READ THIS
TOOLS LIST
It is recommended that the reader pays particular attention to those items identified as IMPORTANT in this
manual to ensure satisfactory long-term performance.
!
IMPORTANT
the table in
Step 1
. This will
determine the concrete and
footing details required.
-
Make sure you are aware of
underground services before
you start digging! These could
be gas, electricity, or water
mains. Call your local council
for more information.
-
Check your local council
regulations on boundary
fencing.
-
Check the delivered material
for the correct number of
components and general
condition before beginning
your installation.
The recommendations detailed
in this guide are formulated
along the lines of good
building practice. They are not
intended to be an exhaustive
statement of all the relevant
data.
If you have any questions,
please contact our Technical
Team on 0800 003 006. We
are always happy to help in
any way we can.
2
0800 003 006
/
boundaryline.co.nz
TOOLS
SAFETY GEAR
minimum required
