9e947
c
11/24/17
8
ViewPoint Touch Screen Installation Instructions
• Install the junction box
on the cover
plate for the touch screen. See
Assembly
Instructions, Touch Screen
for details.
Figure 8: Install the junction box
• Junction box connections:
the cables
must be routed as illustrated.
Figure 9
• Mounting the power supply cable:
Mounting the 24VDC power supply cable
only in the 2 middle terminals.
Figure 10
Polarization of the 24VDC power supply unit
is indifferent because of the rectifier.
• Install the 2 ethernet cables.
Make sure to
place the rubber sleeves when the nut is
tightened.
Figure 11
• Connect the ethernet cables
using an
adaptor inside the junction box.
Figure 12
• Place excess cable
around the junction box
before installing the console with the touch
screen.
Figure 13
