9e947
c
11/24/17
4
ViewPoint Touch Screen Installation Instructions
1. Safety
1.1 Reviewing Personal Safety
Messages
To prevent possible bodily injury, follow the safety
messages below and throughout the booklet. Safety
should be everyone’s primary concern. By follownig
these instructions the major hazards of being pinched
or falling can be avoided. Note that the owner is re-
sponsible for replacing safety labels should they be-
come illegible.
-WARNING---------------
Keep the power turned off and lockout to the power
supply until all system wiring is completed and
inspected. Failure to do so could cause serious injury
or death.
2. Preparation
2.1
Verifying Part and Tool
Requirements:
3560986 Kit, Touch Screen, wall mount
3560987 Kit, Touch Screen, floor mount
3562637 Touch Screen sp wo engrav. logo
3562638 Touch Screen sp w.engrav.logo
3562622 Packed parts, touch screen 19"
2.2
Required Boumatic
Components
• Smart Dairy Controller
• TouchPoint, Viewpoint, or ProVantage meters
• PC Configured with Smart Dairy application
2.3
Dealer Supplied Parts
Cat 5 Ethernet Cable, and Connectors
2.4
Special Tools
• Metric Wrenches (13mm)
•
3
/
16
“ Allen Wrench
• Screw Drivers - Flat Blade, #2 Phillips
• Electrical Wire Stripper
2.5
Specifications
2.5.1
Power
Power Consumption: Typical 47W, Max 60W
Voltage: +24VDC, regulated, 20 to 28 volts
2.5.2
Weight
Touch screen: 24 lbs
Wall mount arm: 10 lbs
2.5.3
Temperature Rating
2.5.3.1
Operational
• 32°F to 109°F (0°C to 43°C)
2.5.3.2
Storage and Transport
• -4°F to 140°F (-20°C to 60°C)
2.5.4
Touch Screen Dimensions
• 18”W x 14½”H x 4½”D
2.6 Calibrating the touch screen
•
No calibration required! If the cursor accuracy
has been lost, please contact BouMatic for
service or
return the touch screen
.
