GLASS PLACEMENT
37754-0-0717
Page 43
If a liner kit has not been installed, stop and install one
before proceeding with media placement.
See page 42.
If applicable, install Logs and Rock Kit prior to placing the
glass media.
Place crushed glass media over the burner, burner surrounds,
and screens in a single layer. Use enough crushed glass media
to cover these areas (8 sq. ft. minimum).
See Figure 65.
Figure 65
NOTICE:
The flame appearance can be modified by varying the
depth of glass media over the burner ports. Assess the flame
appearance before adding more media than is necessary to
cover the burner. Excessive glass media over the burner ports
will cause sooting.
CAUTION
Place glass media carefully around the pilot opening. DO NOT
bury the pilot with glass media.
6
