40245-0-0219
Page 9
MAINTENANCE - GLASS CLEANING
GLASS CLEANING
Clean the glass before use and as needed. During start-up
condensation (which is normal) forms on the inside of the glass
and causes lint, dust and other airborne particles to cling to the
glass surface. Also initial paint curing may deposit a slight film
on the glass. Use a non-abrasive household cleaner and warm
water (we recommend gas fireplace glass cleaner).
CAUTION
Do not use Ammonia-based or abrasive cleaners on glass.
To prevent ectching or discoloring, clean the glass with
Fireplace Glass Cleaner (available from the dealer).
Do not attempt to clean glass when glass is hot.
WARNING
• Avoid breaking the glass.
• Do not operate this appliance without the glass panel
and barrier screen, or with a broken glass panel.
•
Replace only with Empire Comfort Systems parts.
Only glass approved for use by the manufacturer may be used
for replacement. The glass replacement should be done by a
licensed or qualified service person.
WARNING
1. The use of substitute glass will void all product warranties.
2.
Care must be taken to avoid breakage of the glass.
3.
Under no circumstances should this fireplace be
operated without the glass front or with a broken
glass front. Replacement of the glass (with gasket)
as supplied by the manufacturer should be done by a
qualified service person.
4.
Do not abuse the glass by striking or hitting it.
WARNING
Handle the glass with care to avoid breaking it. Never strike
the glass. To prevent etching or discoloring, clean the glass
with Fireplace Glass Cleaner (available from your dealer).
Never use cleaners that contain ammonia or abrasives. Never
clean the glass while it is hot or even warm. Touching hot
glass can cause severe burns. Using liquids or aerosols on
hot glass will cause it to shatter. Never operate the fireplace
with the glass removed or cracked. Have your dealer replace
damaged glass only with glass and gasket material from
Empire Comfort Systems. Using substitute glass will void
the warranty.