
2. Operation Guide
2.1 Analogue Mode
2.2 Self Test Mode
S P - 1
S P - 1
DMX
DMX
DMX
MENU
MENU
MENU
EDIT
EDIT
EDIT
STORE
STORE
STORE
This unit is initially activated by Analogue signal.
Turn main power on, the Segment Display shows
"AnAL", indicating only Analogue mode is active.
Now the output will be controlled by the analogue
signal, the Edit and Store buttons don't work.
1. Tap the Menu button, the Segment Display
shows "SP" followed by one number 1-9, which
indicates Self Test mode is active. A value of 1
gives the slowest speed and the value of 9 gives
the fastest speed.
2. Tap the Edit button to increase the speed. Each
tap makes a change of the speed. Pressing and
holding down the Edit button will increase the
speed quickly.
5
2. Operation Guide
2.2 Self Test Mode
3. While pressing and holding down the Edit
button, tap the Store button. Now each tap
of the Edit button will decrease the speed
by one.
(If you want to increase the speed, tap the
Store button while pressing and holding down
the Edit button).
4. Tap the Edit button to select desired speed.
4. Tap the Store button to store the speed you've
set just before, the Segment Display shows
"Stor'" indicating this selection.
Then tap the Menu button to enter DMX Address
mode.
6
S P - 1
S P - 1
DMX
DMX
DMX
MENU
MENU
MENU
EDIT
EDIT
EDIT
STORE
STORE
STORE
Содержание DSP-12
Страница 2: ......
Страница 15: ......
Страница 16: ...Web site www botex com 24 004 0347 R Rev 1 0 Oct 2000...