Botex DSP-12, Руководство по эксплуатации, Страница: 13 / 16

2. Operation Guide
2.5 Channel Output Mode
2. Operation Guide
2.5 Channel Output Mode
2.6 Initialization
1. Tap the Menu button several times, the Segment
Display shows the current state(Off or Full) of
relevant channel.
2. Tap the Edit button to select channel you wish to
assign it's output(Off or Full), the Segment Display
indicates your selection with the change of "-1" to
"12".
3. While pressing and holding down the Edit button,
tap the Store button to assign output of relevant
channel. Each tap changes the output between
Off and Full.
When the Segment Display shows "o" in the fourth
character, the channel output is "Off",the channel is
controlled by the DMX signal.
When the Segment Display shows "F" in the fourth
character, the channel output is "Full",the channel
is fully on regardless of DMX signal.
l - 2 f
l - 3 f
l - 3 f
DMX
DMX
DMX
MENU
MENU
MENU
EDIT
EDIT
EDIT
STORE
STORE
STORE
DMX
MENU EDIT STORE
4. Tap the Store button to store your setting,
the Segment Display shows "Stor".
Tap the Menu button, this unit will return to
Analogue mode.
When the Segment Display shows "AnAL",
press and hold down all three buttons at
a time for 5 seconds, the Segment Display
shows "INIt" indicating it is initializing all
functions.
Several seconds latter, this unit will return
to normal mode, all functions are default
settings.
DMX
MENU EDIT STORE
9
10