Botex DSP-12, Руководство по эксплуатации, Страница: 11 / 16

DMX
MENU EDIT STORE
2. Operation Guide
2.3 DMX Address Mode
1. Tap the Menu button, the Segment Display
shows the DMX address of last change, this
unit will serve as a DMX pack. This function
allows you to turn on and control the intensity
of non-DMX with the use of a DMX controller.
The DMX address is indicated by "A" followed
by three numbers 001-512.
When this unit is receiving a DMX signal, the
DMX LED will give a continuous blinking in the
Segment Display.
3. Tap the Store button to store your DMX address,
the Segment Display shows "Stor" for 2 seconds.
2. Repeat steps 2-4 in Self Test mode to select
desired DMX address.
7
a 0 0 1 c h - 1
c h - 2
a 0 0 2
DMX DMX
DMX
DMX
DMX
MENU MENU
MENU
MENU
MENU
EDIT EDIT
EDIT
EDIT
EDIT
STORE STORE
STORE
STORE
STORE
2. Operation Guide
2.4 DMX Channel Mode
1. Tap the Menu button several times until the
Segment Display shows "CH" followed by
two digits. This function allows you to use
your pack as a 1, 2, 3, 4, 6 or 12 channel
switch pack. The default setting is 12
channel switch pack.
3. Tap the Store button to store your setting,
the Segment Display shows "Stor".
Tap the Menu button to enter next level.
2. Tap the Edit button to select desired setting.
Each tap changes the selection within 1, 2,
3, 4, 6 and 12. You may also follow the
instructions of self test to change the setting.
For example:
When "CH-1" is selected, 12 channels will
be controlled by one DMX channel. "CH-2"
indicates channels 1-6 will be controlled by
one DMX channel and channels 7-12 by
another DMX channel. When "CH12" is
selected, each channel is controlled by
one DMX channel.
8