Boston Whaler 270 VANTAGE, Руководство пользователя

Страница: 102 / 148

3-28
270 Vantage
Section 3 • Systems & Components Overview & Operation
R
• Plug the power
cable into the
power receptacle
on the starboard
side of the bow
locker.
• Turn the forward
portion of the plug
clockwise to lock.
• To raise the anchor,
press and hold on the
“UP” button of the
remote.
• To lower
the anchor,
press and hold on
the “DOWN” button
on the remote.
Keep hands, feet, hair and loose clothing clear of
moving parts. Entanglement may cause severe
bodily injury (i.e. lose of fingers or toes).
!
WARNING
REFER TO THE MANUFACTURER’S MANUAL IN
YOUR OWNER’S MANUAL PACKET FOR COMPLETE
INSTRUCTIONS.
UP
DO
WN
UP
DO
WN
Operating The Windlass Manually
In the event that there is a loss of power to the
windlass the anchor can be raised and/or lowered
manually by using the emergency handle located in
the bow locker.
Windlass Manual/Emergency Operation
Fig. 3.28.1
EMERGENCY HANDLE
LOOSEN WINDLASS
RAISE/LOWER ANCHOR
1
2
3
1
2
3
Manual Operation
There are two star sockets on the top of the windlass
used for manual deployment of the anchor. Inserting
the emergency handle into the center socket and
turning it counter-clockwise will loosen the anchor
windlass chainwheel. The star socket located off-
center is used for retrieving and lowering the anchor.
Turning the handle counterclockwise will allow you
to lower the anchor, while turning it clockwise will
raise it.
When operation is complete, insert the handle into
the center star socket and tighten the windlass
chainwheel by rotating the handle clockwise. Be
sure to attach the safety lanyard when the anchor is
stowed in the bow pulpit.
If there is a loss of power to the windlass, check the
“WINDLASS” circuit breaker located on the battery
switch panel at the starboard aft cockpit (See figure
4.1.2). If the breaker is tripped, reset the breaker.
If the breaker continues to trip, have the anchor
windlass system checked by a qualified marine
electrician.