Vercise™ Neural Navigator 4.0 Installation Guide
Vercise™ Neural Navigator 4.0 Installation Guide
en
Vercise™ Neural Navigator 4.0 Installer (DB‑7105‑N4A) Installation
Guide
Description
This Installer contains two executable files that will install Vercise Neural Navigator 4.0 (software version 9028429‑400)
and Charge Density (CD) 1.5 Configuration (software version 9028602‑100) onto a Clinician Programmer (CP). The
CD 1.5 Configuration executable file will configure the charge density settings according to your regional regulatory
approval.
Package Contents
(1) Vercise Neural Navigator 4.0 Installer USB drive (DB‑7105‑N4A) containing an executable installation file for
software version 9028429‑400 and an executable installation file for software version 9028602‑100.
This device is to be disposed of per local regulatory requirements.
Software Installation
Important:
Copying or moving of the files on the Installer USB is strictly prohibited. Do not copy or move any files
from the Installer USB onto the CP or to any other electronic device.
Important:
It is important that both Vercise Neural Navigator 4.0 (9028429‑400) and CD 1.5 Configuration
(9028602‑100) be installed on every CP.
Important:
If installation of Bionic Navigator 2.03 (software version 9028287‑203) is also desired on the same CP, it
is recommended that Bionic Navigator 2.03 be installed prior to installation of Neural Navigator 4.0.
Boston Scientific Neuromodulation (BSN) Employees:
To complete the installation of Vercise Neural Navigator 4.0 (software version 9028429‑400), you will need the CP, an
Installer USB, and another VPN‑enabled BSN computer. This installation may only be performed on a compatible model
CP (see the
section of this manual). On your BSN computer, complete the VPN connection
process, then follow the steps outlined in
“Appendix B ‑ Web Activation Portal”
“Appendix C ‑ Web Activation Portal,
to receive an activation key and provide a confirmation key to allow BSN to track the installation.
The steps below must be repeated in order to install 9028429‑400 and 9028602‑100 on each compatible CP as each
installation requires a unique activation key.
If you encounter any issues during installation, contact Technical Support.
Non-BSN Employees:
To complete the installation of Vercise Neural Navigator 4.0 (software version 9028429‑400), you will need your CP and
an Installer USB. This installation may only be performed on a compatible model CP, (see the
section of this manual). To obtain activation keys, contact your local sales representative. The steps below must be
repeated in order to install 9028429‑400 and 9028608‑100 on each compatible CP as each installation requires a
unique activation key.
If you encounter any issues during installation, contact Technical Support.