
7 - ENG
Never load nails with
the contact trip or trigger activated.
Personal injury may result.
1. Read all
Safety Warnings
before
using tool.
2. Connect the air supply to the tool.
3. Lift the canister door latch
(E)
to
open the nail guide door
(H)
.
4. Rotate the canister door (I) open.
5. Adjust the nail platform (J) to
properly accommodate the nail
length being used. Pull the nail platform (J) up or down for desired nail.
Platform Position
Nail Length
lowest position
1-1/2" (38 mm) - 1 3/4" (44.5mm)
center position
1-1/4" (32 mm)
upper position
3/4" (19 mm) - 1" (25 mm)
6. Place the coil on the nail platform (J).
NOTE:
Observe fastener icon (K) Fig. 4.
Insert fasteners (L) with points down.
IMPORTANT:
Fasteners must point in the same direction as they will be driven.
7. Uncoil enough nails [approximately 3" (76 mm)] to reach the nose of the tool.
8. Insert the first nail into the nose and the second nail (M) between the two rails
of the feed pawl as shown in Fig. 5.
Fig. 2
E
H
I
Fig. 3
J
Fig. 5
M
Fig. 6
E
H
Fig. 4
K
L
BRN175_9R209323_MAN_kf V2_multi.indd 7
1/28/15 7:41 AM