manualshive.com logo in svg

BossWeld Buddy MIG 150, Инструкция по эксплуатации

Поделиться
Скачать
BossWeld Buddy MIG 150 Скачать руководство пользователя страница 16

16

FAULTY GOODS SHOULD BE RETURNED IN THEIR ORIGINAL PACKAGING ALONG WITH ANY 

SUPPLIED ACCESSORIES. 

1 YEAR WARRANTY

Your product is guaranteed against manufacturing  workmanship or defect for a period of 12 

months from the original date of purchase. This warranty covers manufacturing defects in materials, 

workmanship and finish under normal use. If a product is found to be defective we reserve the right 

to repair or replace at our sole discretion. 

No responsibility will be taken for products lost, damaged or mislaid whilst in transit.  

To the extent permitted by law this warranty does not cover any indirect or consequential losses 

and our total liability, if any, shall be limited to the amount paid for the product by you to the retailer. 

The benefits provided under this warranty are in addition to other rights and remedies which are 

available to you under Australian law. 

PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE CHECK THE 

TROUBLESHOOTING GUIDE IN THE PRODUCT INSTRUCTION MANUAL

FOR SERVICE SUPPORT PLEASE CALL (02) 8761 6500

IN ORDER TO MAKE A CLAIM UNDER WARRANTY YOU MUST RETURN THE PRODUCT TO  

THE ORIGINAL PLACE OF PURCHASE ALONG WITH YOUR PURCHASE RECEIPT.

WARRANTY

WARRANTY EXCLUSIONS

The following actions will result in the warranty being void:

•  Any damage caused by connection to a power supply or voltage other than specified for the 

machine

•  Damage, faults or defects arising from misuse, abuse accidents or alterations

•  Failure to perform maintenance or maintain good working condition of the machine or accessories 

as set out in the instruction manual

•  If the machine is disassembled or tampered with in any way

•  Fair wear and tear especially to cables, leads etc

•  Consumable items such as electrode holders or clamps

This warranty is given by  
Dynaweld Industrial Supplies Pty Ltd
ABN: 17 050 731 756 
Ph.1300 899 710

Australia (Head Office) 
2/10 Jessica Place, Prestons, NSW, Australia, 2170

Содержание Buddy MIG 150

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды