WASP
TM
Wireless Acceleration Sensor Puck Operations Manual
- 8 -
3.2.
What To Do When An Error Is Reported?
Accelerator Failure (1-Flash)
This is indicative of an electrical failure: either the accelerometer isn’t receiving power or the
device has lost electrical connectivity between the MCU and the accelerometer. In either
event, the device is inoperative. Recommend replacing the WASP unit.
Battery Failure (2-Flash)
Recommend removing and reconnecting the battery as sometimes the power connectors do
not mate evenly. If the problem persists, replace the battery board.
Temperature Sensor Failure (3-Flash)
If the device is not powering up in extreme temperatures, this may be indicative of an electrical
fault with the RTD. Recommend replacing the WASP unit.
Radio Failure (4-Flash)
Much like an accelerometer failure, this is indicative of an electrical failure. The problem is
much more severe in this instance as the device cannot communicate. Recommend replacing
the WASP unit.
Regulator Failure (5-Flash)
This is indicative of an electrical failure. Replace the WASP unit.
4.
Contact Info
BossPac engineers can be reached at:
Ph
: +1 403-216-1226
BossPac Engineering & Technology
1450 28th Street NE, Bay 8, Calgary, Alberta, CANADA T2A 7W6
Toll Free 866 616-1226
