BOSST60 IAX2 Phone User Manual (V1.43)
34
BOSST60 IP phone.
Detailed descrIPtion:
set IPtype X
Set how IP phone gets relevant network parameters. X ranged
from 0 through 3: 0: authorize users set IP address, subnet mask
and router IP address of IP phone manually; 1: use DHCP mode.
With this system, your LAN or router automatically assigns all the
required network parameters to any device connected to it when
the device log on. BOSST60 IP phone is shIPped from the
factory with DHCP on. So, if your LAN or router is configured to
use DHCP addressing, the IP phone’s LAN parameters will
automatically be configured as soon as it is connected to the LAN
or router and powered up; 2: use PPPoE mode. Those ADSL and
Cable Modem users please select this item for it is a protocol
especially designed for them. With this system, ADSL ISP
automatically assigns all the required IP parameters to any device
connected to it when the device log on; 3: use modem mode.
Those who use IP phone with modem, please set the value as 3.
set pppid XXX
With IPtype set as 2, use this command to set ADSL ID; with
IPtype set as 3, use this command to set Modem ID.
set ppppin XXX
