8
Step6
Type the command “ipconfig” to get the network information
Step7:
Then you can assign the IP Address, Subnet Mask(NET Mask) and
9
Default Gateway (Gate Way) to the IP Camera
Step8:
You must use the same Subnet Mask” 255.255.255.0 “and
GateWay”192.168.2.254”
Step9:
You can use any IP Address between 192.168.2.1-254, but please
make sure that the IP Address has never been used or is being used
by any other IP addressable device.
Step10:
For Example: Type the following parameters and click “setting”
Step11
Click the button “Connect”, then you can connect to Camera
