background image

0

Camera IP LAN - Wireless - USB 

BOSSC55

User’s Manual 

1

The information in this document is subject to change without notice. 

This document contains materials protected by copyright. All rights are 
reserved. No part of this manual may be reproduced or transmitted in any 
form, by any means or for purpose without express written consent. 

Federal Communications Radio Frequency Interference Statement. 

Note: This equipment has been tested and found to comply with the limits 
for a Class B digital device, Pursuant to part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy 
and if not installed and used in accordance with the instruction manual may 
cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio of television reception, 
which can be determined by turning the equipment off or on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures:

z

Reorient or relocate the receiving antenna. 

z

Increase the separation between the equipment and receiver. 

z

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected. 

z

Consult the dealer or an experienced radio TV technician for help. 

Notice : 
(1) The changes or modifications not expressly approved by the party 

responsible for compliance could void the user authority to operate the 
equipment.

(2)  Shielded interface cables and AC power adapter, if any must be used in 

order to comply with the emission limits. 

CE DECLARATION 

This device complies with CE class B. 
*EN55024                                  EN61000-4-5 
   EN55022 

 

        EN61000-4-2    EN61000-4-6 

   EN61000-3-2 

        EN61000-4-3    EN61000-4-8 

   EN61000-3-3 

        EN61000-4-4    EN61000-4-11

Printed in Taiwan R.O.C. 
All contents are subject to change without notice. 

Содержание BOSSC55 Wi-Fi Camera Pro
























Отзывы: