Installation
1)
Connect power supply.
2)
Connect external antenna if required.
3)
Turn the power switch on, located on the cabinet.
4)
Select option and complete option programming, if required.
5)
Connect the tuner to the correct input socket on the Bang & Olufsen equipment.
6)
Select the corresponding source on the remote control terminal.
7)
Turn on the tuner manually, if it is not in the automatic power up mode.
8)
Select and program your favorite stations.
Connection to Bang & Olufsen Equipment
This BOSSCOM DAB/FM tuner may be connected to
any
Bang & Olufsen
BeoSound, BeoCenter, BeoMaster,
BeoSystem or BeoVision TV and controlled with a Bang & Olufsen remote control terminal, but it may also be
connected to equipment of any other brand and still be controlled with the Bang & Olufsen remote control terminal.
Through the years Bang & Olufsen equipment has had input sockets added, removed and renamed. A newer Bang &
Olufsen remote control has the button N.MUSIC, which is identical to SHIFT A.TAPE or A.TAPE2 on older remotes.
Below tables are showing available input sockets and their designation on various Bang & Olufsen equipment. The
tables below also show the source that has to be selected to open a given input.
Thus with identified Bang & Olufsen equipment and the selected input socket the required option for the tuner to be
operable may be determined. Some input sockets allow for the CableLink option to be selected, whereas most of the
newer audio equipment requires the Direct Mode option to be used.
The Direct Mode Option:
The tuner is controlled directly with the Bang & Olufsen remote control terminal.
Control from a linkroom is not possible, although the tuner may be listened to there.
The CableLink Option:
The tuner is controlled with the Bang & Olufsen remote control terminal through the connected Bang & Olufsen
equipment sending control data via the connection cable. The tuner may be controlled from any linkroom too.
CableLink
The CableLink option allows for the tuner to be listened
to
and
controlled from any linkroom.
Direct Mode
The Direct Mode option allows for the tuner to be listened to
but
not
controlled from any linkroom. The Direct Mode
option works in any Bang & Olufsen set up, but the tuner’s IR
receiver is not plasma safe.
