Boss Snowplow TGS 800, Руководство пользователя, Страница: 20 / 24

Maintenance
WARNING
Failure to properly maintain the machine could result in premature failure of machine systems
causing possible harm to you or bystanders.
Keep the machine well maintained and in good working order as indicated in these instructions.
Note:
Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
Before each use or daily
• Check the ratchet straps and tighten as necessary.
Every 20 hours
• Clean the chute of any buildup.
• Grease the bearings.
• Tighten the hardware.
Before storage
• Unload the spreader.
• Clean and grease all of the bearings.
Lubrication
Greasing the Machine
Every 20 hours—Grease the bearings.
Grease all of the bearings with a No. 2 lithium grease.
Storage
1. Unload the spreader; refer to Unloading the
Spreader (page 17) .
2. Remove the spreader from the vehicle using the
lift handles; refer to
Product Overview (page 12) .
3. Wash and rinse the entire machine.
4. Clean and grease all the bearings.
5. Clean all exposed connectors and apply
dielectric grease to them.
6. Remove the controller from the utility vehicle
and store it in a clean, dry place.
20