Product Overview
g232360
Figure 6
1.
Hopper cover
3.
Material deflector
2.
Lift points
4.
Spinner
Controls
Become familiar with all the controls before you
operate the spreader.
Material Deflector
The material deflector controls the spread of materials;
you can adjust the controls to provide different spread
patterns; refer to
Adjusting the Material Deflectors
(page 10)
.
Spreader Controller
The spreader controller lets you operate your spreader
and displays information about your machine.
g031017
Figure 7
1.
Blast switch
4.
Yellow LED
2.
On/Off switch
5.
Red LED
3.
Green LED
6.
Speed dial
•
On/Off switch—turns the spinner motor on or off
•
Blast switch—momentarily sends full power to the
spinner motor as long as it is pressed.
7
