Boss Snowplow MSC08042C Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 99

Boss Snowplow MSC08042C Скачать руководство пользователя страница 66

Straight Blade Plowing Tips

67

Every BOSS Snowplow is designed and built with one goal in mind

–

to make your job easier. And each

one has unique features designed specifically to save time and effort, while at the same time ensuring it will

stand up to nature’s worst. But we don’t just make better

snowplows; we have lots of ideas on how to plow

snow better. So browse through this section, and see how BOSS can help you be the best you can be.

BOSS Straight-Blades are the proven choice for professionals and homeowners alike. Built with an
optimized blade curl that means snow rolls cleanly off the plow.

ANGLE-POSITION

In this position the blade is positioned to either the left or right side of the vehicle. Use this position for
windrowing or for widening the first pass.

HOW TO WINDROW

With the blade angled to the left or right side of the vehicle, make consecutive passes

–

each time throwing

the snow forward and to the side. This technique is useful to clear large areas such as parking lots.

STRAIGHT-POSITION

This position is normally used for back dragging

–

with the blade positioned directly in front of the vehicle.

For example: to remove snow from the edge of a building, raise the blade and drive up to the building.
Then lower the blade and back up

–

pulling snow away from the building.

With a little experience, you’ll develop your own methods for plowing and learn exactly which plow position

to use for each pass.

«
...
64
65
66
67
68
...
»

Содержание MSC08042C




































































































Отзывы:

Нет отзывов