Power-V Controllers
18
ON/OFF:
Push the ON/OFF switch to the left ON
position to turn the control on. Green LED indicators
will light up on the control. Push the ON/OFF switch
to the right OFF position to turn the control off.
RAISE:
To raise the blade of the plow, quickly press
the center button upward twice. You can also press
and hold the center button upward until the blade is
fully raised.
LOWER:
To lower the blade of the plow, quickly
push the center button downward twice. You can also
press and hold the center button downward until the
blade is fully lowered.
FLOAT:
The plow will automatically activate the
FLOAT feature when the center button is quickly
pressed downward twice. (The center LED indicator
will turn RED). You can also press and hold the
center button downward for 2 seconds. (The center
LED indicator will turn RED). Press the raise button
to turn the FLOAT function off.
“What Is FLOAT?”:
The FLOAT feature allows the
plow blade to follow the contour of the ground. Press
the raise button to turn FLOAT function off.
Note:
The control MUST be in FLOAT to use
SmartHitch
2
TM
to attach or detach the snowplow.
ANGLE LEFT:
To plow snow to the left, press and
hold the left wing out and left wing in buttons
simultaneously until the blades are fully angled.
ANGLE RIGHT:
To plow snow to the right, press
and hold the right wing out and right wing in buttons
simultaneously until the blades are fully angled.
VEE:
To create the Vee shape with the plow blades,
press both the left wing in and right wing in buttons
simultaneously until the blades are fully retracted.
SCOOP:
To create the Scoop shape with the plow,
press both the left wing out and right wing out buttons
simultaneously until the blades are fully extended.
Note:
The control should be turned off when not in
use. It can then be unplugged and stored.
SLEEP mode:
If the controller is ON but not used for
20 minutes, the automatic SLEEP mode will be
activated. The controller LED lights will flash green
and red when the controller is in SLEEP mode. Turn
the controller OFF to deactivate SLEEP mode.
Содержание MSC08042C
