8
System Settings
1. Press the [
MENU
] button on the front panel or [
SRC
] on the remote control to display the
playing source menu.
2. Touch the Settings icon [
] and the settings menu is displayed.
General Settings
1. Touch [
], if necessary.
2. Touch to highlight a setting to display/select an option.
General Settings Options
Description
Radio Region
USA/Asia/Japan/Europe/Europe
LW/Oirt
Select one that matches your location.
Radio Range
Distance
Select Local to receive only stations with extremely
strong signal.
Local
Beep
On
Turn-ON the beep sound. Each time you press a button,
the unit beeps.
Off
Turn-OFF the beep sound.
Key Color
Choose the backlight color of the buttons.
Calibration
Start
Calibrate the touch screen.
Shortcut
Set the shortcut.
SWC
Enter to SWC interface
Load Factory
Restore to default settings.
Calibration
When the touch operation is not sensitive or valid, you should
calibrate the touch screen using the calibration setting function.
Adjust the response positions of the touch panel as followings:
1. Touch [
Start
] to enter.
2. Touch [
Cancel
] to exit.
3. Press and hold the center of [
+
] for 2 seconds, the [
+
] will
move automatically.
4. Aim at center of [
+
], follow the path as shown in the figure.
Once steps 1-5 are complete, touch [
OK
] to exit calibrating
mode.
SWC Programing
The following controls are available for most vehicles:
1
2
3
4
5
6
Volume -
Mute
Next
Prev
Play
7
8
9
10
11
12
Home
Preset -
Band
Source
Answer
Touch [
Enter
], the SWC menu will display.
Up to 12 steering wheel control functions can be
programmed via the built-in SWC interface. Not all functions
may be supported for each vehicle.
Settings
