Analog on-site backup
Analog on-site backup
P I C
A N G L E
Warning:
Always check the surrounding environment. Objects might be reversed. The rear view
camera is designed only to assist while reversing. Due to the limitations of the camera
angle and range, it may cause accidents if the driver relies solely on the reverse camera
and display.
REAR VIEW CAMERA
The car AV system can make you look at the actual status behind your car when
you change the gear level to the back position.
1. Use an video cable to make the car AV system and the rear view camera con-
nected through the REAR CAMERA INPUT jack in the rear cabinet of the car AV
system and the VIDEO OUTPUT jack of the rear view camera.
Make the REAR CAMERA SWITCH line in the rear cabinet of the car AV system
connected to (B+)12V power supply.
2.
In any running mode, the video signal will switch to camera mode (if applicable)
when car is in reverse.
After taking the car out of reverse, it will resume to its previous mode.
* Note : the external monitor can not display the actual status behind your car.
-27-
Содержание BVI9994
Страница 1: ......
