background image

13

18

7.  PTY (PROGRAM TYPE) BUTTON
     Press the PTY button shortly to select one of the following mode:
           PTY MUSIC group- - PTY SPEECH group- - PTY OFF
    

 When PTY group is on, press the VOL+ or VOL- button on the remote 

     controller or rotate the VOL knob on the front panel to select one of PTY 
     programs: <-->NEWS<-->AFFAIRS<-->INFO<-->SPORT<-->EDUCATE
     <-->DRAMA<-->CULTURE <-->SCIENCE<--> VARIED<-->WEATHER<-->
     FINANCE<-->CHILDREN<-->SOCIAL<-->RELIGION<-->PHONE IN<-->
     TRAVEL<-->LEISURE<-->DOCUMENT< -->PTY NONE<-->POP M< -->
     ROCK M<-->EASY M<-->LIGHT M<--> CLASSICS<-->OTHER M<--> 
     JAZZ<-->COUNTRY<-->NATION M<-->OLDIES<-->FOLK M<--> 
     When PTY group is on, pressing the 6 number buttons also can select one of
     PTY programs as above.
     

After selecting one of the PTY programs, it will display PTY SEEK and 

     automatically search for the station of the PTY program. If the station of
     the PTY program does not exist, it will display PTY NONE and then return
     back to the normal station.      

8.  AF [ALTERNATIVE FREQUENCIES] BUTTON
     When pressed the AF button short, the AF switching mode is selected and 
     the state of the AF switching mode is displayed by AF segment in display.
          Segment off: AF switching mode off.
          Segment on: AF switching mode on, and has RDS information.
          Segment flashing: AF switching mode on, but RDS information is not 
                                          received yet.
     When the AF switching mode is selected, the radio checks the signal strength 
     of the  AF all the time. The interval of checking time of each AFs depends on 
     the signal strength of the current station, from a few minute for the strong 
     station to a few seconds for the weak station. Every time that a new AF is 
     stronger than the current station, it switches over to that frequency for very 
     short time, and the NEW FREQUENCY is displayed for 1-2 second. Because 
     the mute time of the AF switching or the checking time is very short, it is 
     almost inaudible in case of normal program. (When AF flash on LCD, it will 
     search for the stronger RDS station. If AF and TP flash on LCD,  it can only 
     search for the traffic announcement station).     
     In FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can 
     only receive and save the RDS program.      

9.  TA [TRAFFIC ANNOUNCEMENT] BUTTON
     Press the TA button shortly to turn on TA search mode.
     When traffic announcement is transmitted:
     1).If the unit is in Disc Play mode, it will switch to radio mode temporarily.
     2).Temporarily switch over to an EON linked station when EON detects a 
          traffic announcement on that other program, and TA, TP will be displayed 
          on LCD
      *   TA interruption function:
          The current traffic announcement is cancelled by pressing TA button 
          shortly. 
      *   When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received 
          or saved only when traffic program identification code has been received.     

       During slow forward, press the PLAY button to resume normal playback.

       The function is only for video. 

4.10  Playback with still frame

       If the unit is currently running DVD/VCD disc, press the STEP button 
       consecutively to display the still frame forward with step by step. 
     
       Press the PLAY button to resume normal playback.

4.11  Playback Repeatedly

4.11 .1 ONE/ALL Repeat

1.    In the mode of DVD disc playback:
       Press the RPT button to select REP CHAPTER, REP TITLE, REP ALL
       or REP CANCEL

2.    In the mode of VCD(PBC OFF)/CD disc playback:
       press the RPT button to select REP 1, REP ALL or CANCEL.
       When it is in the state of PBC ON, during VCD disc playing, the RPT 
       button are not available.

3.    In the mode of MP3/WMA disc playback:
       Press the RPT button to select REP 1, REP DIR, REP ALL or CANCEL. 

4.11 .2  A-B Repeat

       Press the 

A-B 

button

 

if you want to repeat a specific segment on a disc 

       that you define:     

1.    Press the 

A-B

 button at a point (A) where you want it to be the start point 

       of the repeat segment. Press the 

A-B

 button again at a point (B) where you 

       want it to be the terminal point of the repeat segment. Then it will play the 
       segment repeatedly.

2.    To cancel the A-B repeat mode and resume normal playback, press the 

A-B

 

       button for the third time.        
 
       Note: 
       During VCD/MP3/WMA/CD playback, points A and B must be within the 
       same track. 
       During DVD playback, points A and B can be selected from different chapters. 

Содержание BV7942

















Отзывы: