background image

21

10

2.  Common Operation

1.  To turn on/off the unit
     Under power off mode, press the POWER button to turn on the unit.
     Under power on mode, press and hold the POWER button on the front panel 
     or briefly press the POWER button on the remote control to turn off the unit.  

2.  To select function mode
     Press the MODE button to select TUNER, 
     DISC(After inserting a disc), USB (After 
     inserting a USB storage), Card(After inserting
     a MMC or SD card), AV IN or  AUX mode.
     
     Press and hold the BAND button to turn on 
     shift then rotate the VOL knob or the direction 
     buttons to select function mode; you can also
     use the direction buttons to select function 
     mode and press OK to confirm.
     During playing , select the       to up to the main Menu.
     Press and hold the MODE button the display can be turned off but the unit 
     keeps working, when we press whatever button it returns on.

    Note: This unit has front and rear USB. Only one will work at a time.

3.  To adjust sound level
     Rotate the VOL knob or press or hold the + or - button to directly adjust the 
     volume level.

4.  To mute sound
     Press the MUTE button on remote control to turn on/off MUTE mode. 
     Briefly pressing the POWER button on the front panel also can turn on/off 
     MUTE mode.

5.  To display  the time
     Press the CLK button on remote controller  to display clock time on the small 
     monitor of the front panel in DISC/USB/SD-MMC modes, while under RADIO
     mode it is always displayed

    
6.  To select a preset EQ mode
     Press the EQ button to select the preset music equalizer curves: FLAT, 
     CLASSIC, ROCK, POP, EQ OFF . The sound effect  will be changed.  

7.  To remove the front panel
     Press the REL button on the front panel to detach the front panel from the 
     unit, then you can remove the front panel.

8.  To turn on/off LOUDNESS mode
     Press the LOUD button to turn on/off LOUDNESS mode.
     When turning on LOUDNESS mode, it will enhance bass level immediately 
     when the bass is not enough.

4.20  Program Playback

     It allows you to enter the order in which you want some chapters/tracks in
     DVD/VCD/MP3/WMA/CD disc to play.
1   During playback, press the PROG button to enter a program interface as 
     follows:
         

2   Use the direction buttons to move cursor onto the desired place for inputting
     the sequence number.
3   Use the number button to input desired sequence number of title/chapter/
     track with desired sequence.
4   Use the direction button to move cursor onto Play item, then press the OK 
     button to play the programmed titles/chapters/tracks in programmed order;
     only pressing the PLAY button also can play the programmed titles/chapters
     /tracks in programmed order. 
*    To exit program playback, firstly press the STOP button, then press the PLAY
     button to enter sequence playback; or press the PROG button twice again. 
*    To remove the all programmed sequence numbers, move the cursor onto 
     Clear item, then press the OK button.
*    To change the programmed sequence, move the cursor onto the item you
     want to change, input the desired sequence number.
*    During VCD playback, if it is in PBC ON mode, at the same time of entering
     the state of program playback, it turns off PBC mode.   
  

4.21  Playback the Picture CD in JPEG Format  

1.  The root menu is displayed on the monitor when beginning to switch on DISC 
     mode. At the time, it plays MP3/WMA file.(the TITLE or MENU button is not 
     available). 
     In the root menu, the left file sort icon is for MP3/WMA file; the middle file sort 
     icon is for JPEG file; the right file sort icon is for VIDEO file. If one of these 3 
     file sort does not exist, you can not move cursor onto the file sort icon.
2.  When displaying the root menu, press the direction buttons to select your 
     desired FOLDER, file or file sort icon, then press the OK or PLAY button to 
     open the FOLDER, or play the selected file, or play only this sort of file.
     When displaying the root menu,  you can also use the number buttons to 
     select the serial number of the file and play the file.
     When you select a JPEG file sort icon, press the ^ or > button to select the 
     first JPEG file, then press the v button to select the desired JPEG file, finally
     press the OK or PLAY/PAUSE button to display the JPEG picture in full screen
     from the selected JPEG picture. 

Mode Menu

Содержание BV7942

















Отзывы: