Radio Operation
1. Choose Radio Band
Press the MOD Button to access the radio function. Then press the BND button
to choose among the five radio bands - three FM Bands (FM1, FM2, and FM3)
and two AM Bands (AM1, and AM2). Each of the five bands can store up to six
preset stations, for a total of 30 preset memory stations.
2. Radio Tune/Seek Function
In radio mode, press the Seek +/- button to automatically seek the next strong
and clear radio station. Press and hold the Seek +/- button until the screen
shows MANU SEEK. At this time, you can manually fine tune your desired
frequency. Wait until the MANU SEEK to disappear in order to perform auto
seek again.
3. Automatic Store/Preset Scan
A. Automatic Scan & Store
While listening to the FM Radio, press and hold the APS Button for 3 seconds.
The receiver will automatically scan and save stations for all the 3 FM Bands,
whichever band (FM1, 2 or 3) you are listening to.
While listening to the AM Radio, press and the APS Button for 3 seconds. The
receiver will automatically scan and save stations for the 2 AM Bands, which-
ever band (AM1 or 2) you are listening to.
B. Scan Saved Stations
Press the APS button or the AMS button on the remote control once to perform
the scanning functions. In FM mode, press the APS button or the AMS button
and the stations in that FM band will be scanned; press the button in AM mode
and scan the band stations of that AM Band.
4. LIST button
In radio mode, press the LIST button to go to the preset stations list. Press again
to go to the function list. You can select or change setting in the lists by turning
and pressing the volume knob.
In USB/SD mode, press the LIST button during audio playback in order to enter
the song list. Choose the desired song by turning and pressing the volume knob.
Press the LIST button again to leave the song list.
5. Save your Preset Stations
After choosing the preset stations in the list, you can adjust the frequency (by
Seek +/-), and save it by pressing and holding the volume knob. Alternatively,
you can choose the preset station in the list after adjustment, then save it by
pressing and holding the volume knob. The newly saved preset station will be
refreshed and it will show the new radio frequency.
6. Mono/Stereo Reception Control
After choosing ST in the list, you can turn ST on or off to select stereo or mono
reception. Improvement of reception of weak stations can be done by selecting
ST OFF operation which may cut down some reception noise.
7. Local/Distance Reception Control
After choosing LOC in the list, you can turn LOC on or off to select local or
distance reception. Improvement of reception of distant stations can be done by
selecting LOC OFF operation.
8. RDS-EON CONTROL
This unit is equipped with the latest technology of EON control, so that when
Содержание BV7254
Страница 1: ......
