Basic Operation
1. Turning the unit On / Off
Press the Power Button to turn the unit on. When the unit is on, press the Power Button
once to turn the TFT off. During TFT off, the video out signal will be available so that the
connected monitor will show the screen of the unit. Press the Power Button again to turn the
TFT back on. Press and hold the POW button again to turn the unit off.
2. Mode Selection
Press the MODE Button to cycle the Play Mode between RADIO, USB, SD and AUX in.
3. Sound Control
A. Volume
Use the VOL +/- Button to adjust the volume level. Turn the button clockwise to increase the
volume, and vice versa. The larger the number of volume, the higher the volume level.
B. Bass
Press the SEL Button until the display shows “BAS”. Use the VOL +/- Button to adjust. When
EQ is ON, bass control is not available.
C. Treble
Press SEL Button until the display shows “TRE”. Use the VOL +/- Button to adjust. When EQ
is ON, treble control is not available.
D. Balance
Press SEL Button until the display shows “BAL”, then use the VOL +/- Button to adjust the
balance between the left & right speakers.
E. Fader
Press SEL Button until the display shows “FAD”, then use the VOL +/- Button to adjust the
balance between the front & rear speakers.
F. Preset Equaliser Function
Press the SEL Button until the display shows “EQ OFF”, then use the VOL +/- Button to
choose the equaliser sound effects. The Sequence of equaliser setting will be EQ OFF-
POP-ROCK-CLASSIC.
G. Beep On/off
Press the SEL Button until the display shows “BEEP ON”, then use the VOL +/- Button to
turn the beep sound off. The word “BEEP OFF” will be shown on the display.
H. Loudness
Press SEL Button until the display shows “LOUD OFF”, then use the VOL +/- Button to turn
loudness on. The word “LOUD ON” will be shown on the display.
4. Mute Control
Press the MUT Button to activate the Mute function. Press MUT Button again or use the
VOL +/ - Button to cancel.
5. HOME Button
In Radio and Aux modes, press the HOME button to go back to the home screen. You can
select different play modes by turning and pressing the volume knob. Also you can enter the
setup menu in the home screen.
In USB and SD modes, during music or video playback, press the HOME button once to go
back to the directory page, in which you can choose the desired file by pressing and turning
the volume knob. Press again the HOME button to go back to the home screen.
6. SETUP
Enter the setup menu in the home screen by turning and pressing the volume knob. Turn
the volume knob to each item you would like to set. Press the volume knob in each of the
item, followed by turning the volume knob to adjust settings. After adjusting, press the vol-
ume knob to confirm. Repeat these steps to finish the setting of other items. You can adjust
language, date, time, brightness and master reset accordingly.
7. Clock
Press the clock button on the remote control to see the time during USB and SD modes. The
clock always shows itself during radio and Aux modes.
Содержание BV7254
Страница 1: ......
