background image

BV7200 User’s Manual - page

 

10

Adjusting the Volume Level

Press 

VOL+/- 

to adjust the volume level.

Last position memory

- During disc playback, press and hold the 

 to turn off the unit, when you next turn on 

the unit, the DVD unit will resume playing 
from the point that it was interrupted.

- During disc playback, if you press 

MODE

 

to switch to a different mode, when you 
next return to DVD mode, playback will 
resume from the point at which it was inter-
rupted.

Radio Operation

VOLUME   25                      AM 07:12

FM1

STEREO

LOC

RADIO

1 0 7 . 1 5    M H Z

2

Selecting the frequency band

Press 

BAND 

button repeatedly to select 

the desired radio band.

Stereo/Mono

FM listening is generally done in Stereo 
mode. However, if the signal is weak or 
reception is not as good as you would like, 
switching to Mono mode usually improves 
the overall sound quality. To switch to Mono 
mode, press 

ST

 (or 

MO

ST

 on the remote 

control). Press it again to return to Stereo 
mode.

Local/Distant

In urban settings, most stations are strong 
enough to listening in LOCAL mode. 
However, if a station seems too distant to 
be received well, try switching to DISTANT 
mode by pressing and holding 

ST/LOC

 

(or pressing 

LOC

 on the remote control). 

Press it again to return to LOCAL mode.

Selecting Stations

- Press preset station button 

1-6

 to select 

a station which has been stored in the 
memory.

- Press and hold the   or   buttons until 
“MANUAL” appears on the screen, then 

press   or   buttons to select a station. 
If both buttons have not been pressed 
for several seconds, the unit will return to 
automatic seek mode.

Automatic Memory Storage & Program 

Scanning
       - Automatic Memory Storing

This feature is used to automatically set up 

presets for the radio. Press and hold the 

AS•PS to start the tuner searching the fre-

quency band and storing the six strongest 
stations as presets.

       

- Program Scanning

After the presets have been recorded, 

when you press this button, the radio will 
scan the preset buttons in order. It will play 
a station for a few seconds, and then move 
to the next. When you hear a station that 

you wish to listen to, press the 

AS

PS

 but-

ton again to stop the scanning.

Setting up Presets Manually

To set up the presets manually, tune to the 

desired station using the    and   buttons. 

When you fi nd a station you like, press and 

hold the desired preset button for a few 
seconds to store it.

 

Содержание BV7200

































Отзывы: