2) Press the INT button to sample the first 10 seconds part of each track, and the
ON will be visible on the LCD.
In the process of INT, press INT button again to stop sampling and to continue
playing the current track, and the LCD will display OFF.
3) Press the RPT button once to play the current track repeatedly, and the
ONE will be visible on the LCD.
Press the RPT button twice
Press the RPT button thrice to stop playing repeatedly
display OFF.
4) Press the RDM button to play all tracks on disc in random order, and the
RANDOM will be visible on the LCD.
In the process of RDM, press RDM button again to stop playing in random
order and the LCD will display OFF.
5) Press the -10 and +10button to move up and down10 tracks at a time.
When the remained total tracks is lack of 10, the both buttons are inactively.
9. BAND AND LOC BUTTON
1) In radio mode.
Press the BND button briefly to select the radio broadcasting
like to hear. The AM/FM band is toggled cyclically through the
->FM 1-> FM 2 -> FM 3 -> AM1(MW1)->AM 2(MW2) ->.
Press and hold the BND button to select LOCAL/DX mode.
Note: This button is only for FM reception. In AM mode, LOC is void.
10. MODE BUTTON
Press the MODE button to change among tuner (radio), disc (when a disc is
loaded), USB (when an USB stick is inserted) and AUX mode.
11. EJECT KEY
In the power on state, the loaded disc can be ejected by pressing the EJ key.
12. LOUDNESS BUTTON
When press briefly, the LOUD mode is turned on, its to enhance the bass sound
effect when the volume level is low. Press again to cancel the loudness effect.
RPT
to play the current folder repeatedly, and the
RPT DIR will be visible on the LCD.
mode and the LCD will
band you would
tuning bands:
2) During MP3/WMA file in disc or USB mode:
Press the BND button briefly to TRACK SEARCH mode, the LCD will display
TRK T 000 and flash the bigest digit 0 that the USB stick contain. (if the number
of tracks is less than 100 and more than 9, it will be TRK 00) Then rotate the
number of the flashing digit from 0 ~ 9. Then press SEL button to confirm the
VOL knob to select the number and flash next smaller digit 0.
With the same means, select the number of the flashing digit. After finishing
selecting the number of all flashing digit, press SEL button to play the track of
the selected serial number.
INSTALLATION METHOD
This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal mounting
sleeve into the car as per the diagram illustrated below.
METAL
SUPPORT STRAP
To raise the anti-skip capability of the unit,
please ensure the metal support strap is
connected firmly to the car chassis.
To properly fix the metal mounting
sleeve, bend the tabs of the sleeve
against the DASH BOARD with a
screwdriver.
DASHBOARD
METAL MOUNTING SLEEVE
UNIT CHASSIS
PLASTIC TRIM RING
FRONT PANEL
To remove the CD player out of the mounting sleeve,
insert the two supplied keys into the left and right side
slots of the chassis at the same time.
NOTE
Before installing and operating
the CD player, remove the metal
mounting sleeve illustrated by
the arrows.
Remove the two screws that protect
the CD player during transportation
before operating the player.
To attach the removable faceplate, insert the
right side of the faceplate into the right of the
CD player chassis first. Then push the left side
of the faceplate into the chassis until you hear
it “click”.
Содержание 637UA
Страница 1: ......
