background image

    

 

    

 

2) when press briefly, the radio searches for each preset station in the current

          band and holds at that preset number for 5 seconds with releasing mute, and
          then search again.   

     14. ST/MO BUTTON

          In FM mode, press the ST briefly to select stereo or mono sound mode.

     

15.CLK BUTTON 

          

Press the CLK button briefly to display time for 5 seconds on the display, and

          then returns to its previous display unless the button is pressed again.
          Then press the CLK button and hold for more than 1 second until the real time
          flashes on the display. Then you can adjust HOUR or MINUTE by rotate the 
          VOL knob.    

    

 16.AUX INPUT JACK

         

Press the mode button to select auxiliary input playing mode. Then you can 

         connect any matched external audio device to this socket. Use the volume 
         knob to adjust volume.

  

  17.USB SOCKET

        

 In order to play the file in the USB stick, turn over the plastic cover cap then

         insert the USB stick into the USB socket. The system will change into the
         USB mode automatically, and then play the first file in the USB.

 

         

When no needing to do USB operation, please cover the plastic cover cap.

    

  

  

13. AS/PS BUTTON (Auto-storage /Preset scan)

      During radio mode:

     1) when press and hold for more than 1 second, the radio searches from the
         current frequency and checks the signal strength level until 6 station are 
         found. And then the 6 stations frequency are preset to the corresponding 
         preset memory numbered bank. The auto-storage operation is implemented
         in the each selected band. When the auto-storage operation is finished, the 
         radio execute the Preset Scan. 

     

 

  

 18. RELEASE BUTTON

          

Press the REL button to release the front control panel from the unit chassis,  

          then pull it up a little to remove from the unit chassis.
          When the front control panel is removed the LED indicator flashes.

   

19. RESET BUTTON

          Before operating the unit for the first time, or after replacing the car battery or
          changing the connections. You must reset the unit.
          Press this button with a cuspidal object. This operation will erase the clock
          setting and some stored contents.

   

BOSS AUDIO CAR STEREOS

CAR AUDIO SYSTEMS

Содержание 637UA







Отзывы: